Dishwasher Installation Video
ADVERTISMENT – become one of us and contribute knowledge
You Might Be Interested In
Comment (0)
LEAVE YOUR COMMENT
You must be logged in to post a comment.
This site uses Akismet to reduce spam. Learn how your comment data is processed.
In reality, you will run into some location specific situations. Stick with it, you'll get there. If you get in over your head, please call Whirlpool corp for help.
One suggestion: on the units with 3 or more insulation sheets on the back of the kick panel… put a sheet of paper on the floor under the water valve so that it can be pulled out after the kick plate is on. I've seen that insulation push on the brass adapter hard enough to cause a seep where no leaks were before installing the kick plate. A dry piece of paper 10 minutes later doesn't guarantee no leaks, but it is one more safety check.
Also, there is a special room in purgatory for the person who decided on that design of electrical box.
Hay traducción para este vídeo. o un vídeo en español. Por favor.
The controls are on the top and with this installation the user would not be able to operate this dishwasher.
Thanks, the electric was the part I was having trouble with but this helped me figure it out.
The people or person's involved in the design of this electrical box should have to write an apology to everyone then fired. I've installed a lot of electrical boxes in dishwashers and this was the first time I had to read a worthless instruction book then watch a video on a stupid design. Everyone else's take the removal of a single screw then remove the cover but not these morons. You have to take the box of the mounting just to open it, wire it and remount it and then flip the machine.
Whirlpool should be ashamed of the directions provided. I had to buy a metallic strain relief online because they don't include it. Home Depot and Lowe's didn't carry them. Cost me almost $20 with shipping. Turns out, I didn't need it because I was using the plug that came with the dishwasher. You only need the strain relief if you are using the wire that comes directly out of the wall from the previous dishwasher. If there's an outlet there, there's no need for a strain relief. Kind of an important detail, Whirlpool! Also, the height adjustment settings were WAY OFF!
My whirlpool Dishwasher detergent/Tablet box didn't open automatically during cleaning untensil. What happened? How it can be solved?
Excellent very Clear, and helpful. Thank you! I have a question, Shouldn't the appliance have a manufacturing name on it.? What is the best way to verify it? Last question, do you offer support on outdoor Decks reconstruction!