How to Repair a Cracked Floor Joist | Ask This Old House
This Old House general contractor Tom Silva helps a homeowner repair a cracked floor joist.
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Shopping List for Repairing a Cracked Floor Joist:
– Carpenter’s glue, used to mend cracked joist
– Old-work joist hanger with hanger nails, used to support end of joist
– Cloth, for wiping off excess glue
– 1x3s, used to make cross-bridging
– 2x lumber same size as floor joist, used to make solid blocking
– 3/4-inch plywood, used to reinforce a notched joist
– Nails and construction adhesive, for securing the plywood strip
Tools List for Repairing a Cracked Floor Joist:
– Hydraulic jack and 2×4 post, used to jack up the cracked floor joist
– Hammer
– Caulk gun, for applying construction adhesive
Steps for Repairing a Cracked Floor Joist:
1. Squeeze a generous amount of carpenter’s glue into the crack in the floor joist.
2. Slip an old-work metal joist hanger onto the end of the joist.[BR]
3. Position a 2×4 post and hydraulic jack directly beneath the cracked end of the joist.
4. Pump up the jack until the post pushes closed the crack in the joist.
5. Fasten the hanger to the beam with hanger nails.
6. Use a cloth to wipe off any excess glue from the joist.
7. Install cross-bridging or solid blocking between joists to help stiffen the floor.
8. When notching a joist, all notches should fall within the first or last third of the joist. Never cut a notch into the center third of a joist.
9. The depth of the notch shouldn’t be more than one-sixth the height of the joist.
10. The length of the notch shouldn’t be more than one-third the height of the joist.
11. Notches should be cut straight and clean with radiused corners.
12. Reinforce a notched joist by attaching a 3/4-inch plywood strip.
13. Cut the plywood strip at least as wide as the joist and secure it with construction adhesive and nails.
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we’re ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O’Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite
How to Repair a Cracked Floor Joist | Ask This Old House
https://www.youtube.com/user/thisoldhouse/
About The Author
You Might Be Interested In
Comment (0)
LEAVE YOUR COMMENT
You must be logged in to post a comment.
"Your floor will still sag but its fixed". Ah, how about jacking it up level and install a lolly column to support it?
Plowed
She sounds like the best version of a typical homeowner
well RIP me lol I just bridged my entire basement with #8 screws cause that is what I had on hand =( Does it matter that I did it as a solid 2X6 starting at the bottom of the joist? please tell me I don't have to re-do it lol They have 3 2.5 inch screws in each side btw.
Why not just install some more jacks/braces and level out the floor?
The show was so good because of the chemistry between these four guys getting old sucks
I bet tom has a solid 2×4
I can move in and take good care of her
2:59
she need to lose some weight