How to Install a Whole-House Ductless System | Ask This Old House
ADVERTISMENT – become one of us and contribute knowledge
You Might Be Interested In
Comment (0)
LEAVE YOUR COMMENT
You must be logged in to post a comment.
Ask This Old House plumbing and heating expert Richard Trethewey shows a style of ductless heat pump that can be used to heat and cool an entire house.
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Time: 1-2 days
Cost: $10,000 and Up
Skill Level: Professional
Steps:
1. Installing a whole house heat pump is best left to a professional contractor. The contractor should run a heat load calculation to determine the correct sizing of the overall system.
2. A wall-mounted ductless heat pump is a good solution for open areas like entertaining areas, bonus rooms, or open floor plans.
3. Outdoor units can be sized to accommodate multiple zones of heating and cooling.
4. In snowy climates, the outdoor unit should be mounted above the snow line.
5. Refrigerant tubing connects the outdoor unit to the indoor units via a branch box which can connect 5 indoor units with individual refrigerant lines.
6. Ductless units can be attached to duct work to feed conditioned air into the living space. Each unit requires two refrigerant connections, a drain line to remove condensate, a supply duct to bring conditioned air to the living space, and a return duct to bring the air back to be heated or cooled.
7. Each zone has its own programmable thermostat.
Resources:
All of the heating and cooling equipment, including the outdoor condenser, indoor wall-mounted unit, and indoor air handlers [https://amzn.to/2A4Cr1u] are manufactured by Mitsubishi Electric Cooling & Heat (https://www.mitsubishipro.com/).
Expert advice with this installation was provided by NETR Inc. (https://www.netrinc.com/).
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we’re ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O’Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite
How to Install a Whole-House Ductless System | Ask This Old House
https://www.youtube.com/user/thisoldhouse/
You must be logged in to post a comment.
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Wow talk about overkill
Ductless.systems lose there efficiency below 30 deg, not good for northern states, the best and most comfortable heating system is a low pressure steam with cast iron radiators. You can then put a cheaper air conditioning system instead of an expensive ductless heat pump.
Good luck fixing that when it’s breaks. That’s a tech support phone call if I ever seen one
I guess I'll stick to 3 window units in my big colonial.
Mitsubishi is one of the top of the line mini split units. Prob a $30k job..yikes
I've seen better acting on pornos
Wow
Who the hell thought a electric ceiling radiator made sense? Heat rises!