Fix a Toilet That Keeps Running
This video shares several methods for fixing a toilet that keeps running. Your toilet tank has a fill valve, flush valve, and flapper. And it’s these parts that ultimately lead to the toilet running. My $116 water bill could have been prevented by simply replacing the $5 flapper.
The second way a leak occurs is when the flapper chain gets stuck between the flapper and flush valve. If you encounter this just trim the chain so that it doesn’t drape below the flapper. Problem solved.
Sometimes the water in the tank is too high. If this is the case it will run over the overflow pipe and cause the tank to refill. You need to lower the tank’s water level to about 1 inch below the overflow pipe. Watch the video for a more in depth explanation.
A toilet that keeps running is annoying, not to mention expensive. I’m sharing my tips so that you don’t suffer from a $116 water bill like me. Hopefully these tips help you with your project.
For more tips on fixing a toilet that keeps running, visit: https://www.homerepairtutor.com/how-to-fix-a-running-toilet/
#runningtoilets #DIYtoiletrepair #fixarunningtoilet
To make toilet repair easier try these supplies:
Flapper: http://amzn.to/2zux9OO
Fill Valve: http://amzn.to/2A44tt4
Flush Valve: http://amzn.to/2jQUZNJ
Screwdrivers: https://amzn.to/375FXHH
Wire Cutters: https://amzn.to/38iVbJF
Some product links may be Amazon affiliate links. As an Amazon Associate we earn from qualifying purchases at no additional cost to you.
0:34 Tools needed
0:52 Culprit #1 flapper
1:19 Culprit #2 flapper chain
2:01 Culprit #3 water level too high – adjust the float
3:10 Adjusting with a float ball
4:07 Adjusting with a diaphragm fill valve
5:11 Culprit #4 bad fill valve
Want our newest DIY videos? Subscribe to our channel and hit the notification bell to see every upload. We upload new videos every Saturday.
Disclaimer:
Videos produced by Home Repair Tutor are provided for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Home Repair Tutor does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes they are doing it at their own risk and Home Repair Tutor cannot be held liable if they cause any damage to their homes. Home Repair Tutor cannot claim liability with all applicable laws, rules, codes and regulations for a project.
About The Author
You Might Be Interested In
Comment (0)
LEAVE YOUR COMMENT
You must be logged in to post a comment.

Thanks for the video. I replaced my flapper a couple years ago and its been running lately, just checked the flapper and the rubber is dried out. Do you ever put a lubricant safe for plastics on there to preserve the rubber?
Thank you; it literally took me least than five minutes.
Is 51 seconds too long for a toilet to run?
That chain is my worse enemy tbh
Good info. I changed the flapper and fill valve and it stopped running, a week later it started flushing on it's own again about every 30 sec. What can I do now?
You have a strange thumb lol
Very helpful! Thanks for the visuals
Thank you for saving me some money! KUDOS!
Adjusted the water level screw like you suggested. Fixed in 5 seconds! Thanks a million!
This was great! Thanks