How to Install a Quartz Countertop | Ask This Old House
ADVERTISMENT – become one of us and contribute knowledge
You Might Be Interested In
Comment (0)
LEAVE YOUR COMMENT
You must be logged in to post a comment.
Ask This Old House host Kevin O’Connor learns how quartz countertops are manufactured and then helps install one in a homeowner’s kitchen.
#ThisOldHouse #AskTOH
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Time: 1-2 weeks
Cost: $1500 and up
Skill Level: Expert
Steps for installing quartz countertop:
1. Kevin starts by explaining how quartz countertops are manufactured:
a. Quartz is a mineral, which is mined out of the ground and crushed into different sizes.
b. The quartz is then mixed with a binder and poured into a form.
c. The form is compacted, vibrated, and baked at 200 degrees for 30-60 minutes, which turns it into a hard, stone slab.
2. To have a quartz countertop installed, the existing cabinets need to be templated by a stone fabricator.
3. Once the cabinets have been templated, the fabricator can cut the quartz to the proper dimensions, including cutting out a hole for sink, using a variety of specialty cutting tools.
4. When the quartz is ready to be installed, the old countertop will need to be removed.
a. Start by shutting off the water to the kitchen sink and disconnect the supply hoses with a wrench.
b. Loosen and disconnect the drainpipe.
c. Pry the sink away from the countertop. Oftentimes, the sink is clipped to the countertop and those can easily be pried off.
d. Pry the countertop off using a pry bar.
5. The quartz slab can then be installed on the cabinet using silicone and clips. Quartz is heavy, so it will take multiple people to install it.
Resources:
Kevin toured the manufacturing facility for Cambria Stone (https://www.cambriausa.com/). The slab that was installed at Jenny’s house was also Cambria quartz in the color “Windermere [https://bit.ly/2LMfgid].”
The tools required for installing the quartz, including the hammers and pry bars for removing the old counter, and the silicone to secure the new countertop, can all be found at home centers.
Expert assistance with this segment was provided by Gemini Stone, LLC of Everett, MA [https://www.geministone.net/about-us].
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we’re ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O’Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Jenn Nawada.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
Keywords:
This Old House, Ask This Old House, DIY, Home Improvement, DIY Ideas, Renovation, Renovation Ideas, How To Fix, How To Install, How To Build
Watch the full episode:
https://www.thisoldhouse.com/season-18-ask-toh-episodes
How to Install a Quartz Countertop | Ask This Old House
https://www.youtube.com/user/thisoldhouse/
You must be logged in to post a comment.
This site uses Akismet to reduce spam. Learn how your comment data is processed.
wow counters are easier to install than i ever imagined!!!
Quartz doesn’t scratch….hmmmmm, I’m thinking you don’t own quartz. FOR SURE IT SCRATCHES. And even though you probably should seal granite, I haven’t sealed mine and it’s 20 years old. No stains….
Thank you very much!
I do not use silcion to glue down the counter top apoxy glue is used
And the shoulda asl the home wear if they want the back splash to be cut down before installing and covering the swith
You told a story. The electrical out should have been moved prior to countertop installation. Now it is going to be difficult to move.
Why not just trace the old counter top
What’s the wheels called is there a name for it?
The biggest surprise to me was removing the countertop and then having them come in to measure for a replacement. Given that the piece is a special order, fabricated to the measurements, what does she do for kitchen counters while it is being made? As for the electrical outlet behind the backsplash, you have professionals come in to do the work specifically to avoid such bone headed mistakes. Why they would post this video showing such an error is yet another bone headed decision. SMH.
When I think about it the shut-off should be underneath the cabinets but why is it such a bad idea to have the P-trap down below so you could get to it easier in your basement a small step ladder and a bucket I mean there's never enough room underneath the sink cabinet unless that's not code