A homeowner’s radiator sprung away from the pipe when he tried to replace the valve, so Ask This Old House plumbing and HVAC expert Richard Trethewey heads to his house to help him reconnect it
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Time: 1-2 hours
Cost: $50
Skill Level: Difficult
Tools List for Reconnecting a Radiator:
Spud wrench [https://amzn.to/35yvZhX]
Pipe wrenches [https://amzn.to/31f9tY0]
Ratchet straps [https://amzn.to/2ORaXVQ]
Shims [https://amzn.to/2OQlMrd]
Shopping List:
Hose [https://amzn.to/2BeSWbV]
Radiator valve [https://amzn.to/35HkTHx]
Pipe dope [https://amzn.to/2MNaZLy]
Single strand wicking [https://amzn.to/2IQ6ONN]
2×4’s or other scrap wood [https://amzn.to/32kEniO]
Steps:
1. Start by shutting off the boiler and the cold water feed to the boiler.
2. Drain the system using a hose and vent each radiator in the house.
3. Remove the temporary caps using the pipe wrenches. When using the wrench, be sure that it touches the pipe in three places so it does not damage the pipe.
4. Disconnect the spud from the radiator valve.
5. Apply the pipe dope to the threads of the spud and seal it with the single strand wicking.
6. Using the spud wrench, carefully tighten the spud in position. Be sure the threads correctly catch to prevent damage to the spud.
7. Apply the pipe dope and wicking to the pipe coming up through the floor.
8. Thread the other half of the radiator valve onto the pipe, again being cautious of cross threading.
9. Tighten the radiator valve using the pipe wrenches. Once the valve is in the direction of the radiator, it can be reconnected.
10. Wrap the ratchet straps around the legs of the radiator and put a 2×4 or another piece of scrap wood into the strap. Using the 2×4 as a lever, carefully pull the radiator into position with the valve. It might help to wedge shims on the other side of the radiator to hold it in place. You can use multiple levers if you need to adjust the height as well.
11. Once the radiator has been moved so it’s perfectly aligned with the valve, connect the valve to the spud using the nut that connects the two.
12. Once the connection has been made, tighten it with a wrench.
13. With all the work done, turn the cold water feed and the boiler back on and vent all the radiators again.
Resources:
All the tools Richard used to reconnect the radiator, including wrenches, pipe dope, wicking, and the radiator valve, can all be found at home centers and plumbing supply houses.
About Ask This Old House TV:
From the makers of This Old House, America’s first and most trusted home improvement show,Ask This Old Houseanswersthe steady stream of home improvement questions askedby viewersacross the United States.Covering topicsfrom landscaping toelectrical to HVAC and plumbingto painting and more.Ask This Old House features the expertsfrom This Old House, includinggeneral contractor Tom Silva, plumbing and heating expert Richard Trethewey, landscape contractor Jenn Nawada, master carpenter Norm Abram,and host Kevin O’Connor. Ask This Old House helps you protect and preserve your greatest investment—your home.
Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free: https://bit.ly/2GPiYbH
Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: https://www.thisoldhouse.com/pages/streaming-app
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite
Watch the full episode:
https://www.thisoldhouse.com/watch/radiator-fireplace-veneer-ask-toh
How to Reconnect a Radiator
https://www.youtube.com/user/thisoldhouse/
David helps a NY couple find their second home on Oneida Lake. source
Brian and Mika help an engaged couple with their first big joint decision. source
This home is located in the neighborhood of Rocky Creek in Southwest Austin. The builder…
A family building a dovetail log cabin races to beat the elements. source
In this video, you will learn how to set up a photography studio at home…
View Comments
1
2
He should check to see if the valve is open before he left.
Fixing an old radiator is art that few know....good job Richard.!!!
Why is it that these old house still uses radiators ? Is it because it to expensive to change the heating system to another type.
Very informative. I would totally screw this up
I really liked this episode!
If anyone didn't have wicking just use horse hair and grease we do this in Poland and it works all the time because Teflon tape is just not economical to use
Stress on HOT water pipes .. Not gonna be pretty when they crack ..
If those two legs on the rad aren’t back on the floor there would still be stress on the connection fittings. Maybe they left a wedge under the legs?