Ask This Old House plumbing and heating expert Richard Trethewey helps a homeowner add an industrial looking faucet to his kitchen sink
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Cost: $250
Skill Level: Moderate
Tools List for Installing an Industrial Kitchen Sink:
Basin Wrench
Adjustable Open End Wrench
Screwdriver
Shopping List:
Faucet
Plumber’s Putty
Steps:
1. Before doing any plumbing work, ensure the water is turned off to the fixture.
2. Use a basin wrench to loosen the nuts holding the old faucet in place.
3. Water supply connections will vary by manufacturer and faucet. It’s often easier to make some of these connections on the countertop before installing the faucet in the sink.
4. Follow the manufacturer’s instructions to ensure the correct installation and order of nuts, washers, and waterproof gaskets. Depending on the faucet, some may require plumber’s putty.
5. Before tightening from below, ensure the faucet handle is oriented correctly and is square to the sink.
6. Once the faucet is secured, connect the water supply hoses to the faucet and shut off valve.
Resources:
Richard installed the Parma Single Handle Pre-Rinse Kitchen Faucet, manufactured by Danze (https://www.danze.com/).
About Ask This Old House TV:
Homeowners have a virtual truckload of questions for us on smaller projects, and we’re ready to answer. Ask This Old House solves the steady stream of home improvement problems faced by our viewers—and we make house calls! Ask This Old House features some familiar faces from This Old House, including Kevin O’Connor, general contractor Tom Silva, plumbing and heating expert Richard Trethewey, and landscape contractor Roger Cook.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite
How to Install an Industrial Kitchen Faucet | Ask This Old House
https://www.youtube.com/user/thisoldhouse/
David helps a NY couple find their second home on Oneida Lake. source
Brian and Mika help an engaged couple with their first big joint decision. source
This home is located in the neighborhood of Rocky Creek in Southwest Austin. The builder…
A family building a dovetail log cabin races to beat the elements. source
In this video, you will learn how to set up a photography studio at home…
View Comments
Well, that looked easy! Thanks for sharing.
Not bad.
Farrah faucet
That faucet is an "industrial look" but wouldn't last a week in a restaurant. For the real deal, you would want a faucet and sprayer manufactured by T&S Brass or Chicago. Those would last for years, being used 18 hours a day and are easily rebuildable
Does atoh charge fees for home repair?
Can you to my home
I hate dishes so I want this pretty bad lol
"in 2019, this list helped me decide for the best kitchen faucet scafe.shop/tbkf2019?H8 hope it helps you out too!"
"in 2019, this list helped me decide for the best kitchen faucet scafe.shop/tbkf2019?W4 hope it helps you out too!"
Those pipes are very badly corroded.