Easy DIY Fab Table – Do It Yourself Metal Fabrication and Welding Table

In this video, Andrew and the team build an easy, DIY fabrication table for metal working and welding!
Using simple 2 inch square legs, 1/4″ sheet metal and casters watch Andrew weld it all together and mount an anvil to it for a perfect addition to Narwhal Labs metal shop!

Thank you to Armor Tools for the clamps that helped hold down everything while we welded.
https://armor-tool.com/

Narwhal Labs is a community and makerspace that encourages and supports creative building, learning, and experimentation. Located in Bristol, Rhode Island at TotalBoat and Jamestown Distributors HQ.

https://www.narwhallabs.com
https://wiki.narwhallabs.com
https://github.com/narwhallabs

______________________________

Supporters of NarwhalLabs:

TotalBoat – http://www.totalboat.com/
AvidCNC – https://www.avidcnc.com
ThunderLaser USA – https://www.thunderlaser.com/
MakerMade – http://www.makermade3d.com/
Arbortech – https://www.arbortechtools.com/
Bits&Bits – https://bitsbits.com/
Rockler – https://www.rockler.com/
Pony Jorgensen – https://ponyjorgensen.com/
SPAX – https://spax.us/